Intermodal equipment sales, leasing and service worldwide
IEG Intermodal supplies refrigerated and dry containers, gensets, chassis, terminal equipment and special containers for sale and lease worldwide, with on-site cold storage, parts supply and mobile service behind them.
Send us your requirement
Equipment type, quantity, condition grade and delivery location.
About
IEG Intermodal is an intermodal equipment company supplying refrigerated and dry containers, gensets, chassis, terminal equipment and special containers to shipping lines, motor carriers, lessors and cold chain operators worldwide.
The company operates across sales, leasing, cold storage, parts and service, sourcing equipment against each requirement rather than selling from a fixed inventory. Equipment is supplied new, used and as-is, with cargo worthy and road worthy grades available.
IEG Intermodal is an authorized Carrier parts dealer and provides mobile service for gensets and refrigerated container machinery.
Work with us
Send the equipment type, quantity, condition grade and delivery location.
Equipment
Refrigerated and dry containers, gensets, chassis, terminal equipment and special containers. Available new, used and as-is with cargo-worthy and road-worthy grades on request.
Specifications below are standard figures for each equipment type. Condition grade, machinery brand, inspection status and delivery location vary by unit. Contact us for current availability and pricing.
Refrigerated Containers
40′ High Cube Reefer
Used · Carrier or Thermo King machineryForty-foot high cube refrigerated container for perishable food, beverage and temperature-sensitive cargo.
Features
- HGSS roof panels
- Vacuum valve
- T-bar flooring
- Interior aluminum scuff lining
- Compatible with low-GWP refrigerants
- Carrier or Thermo King machinery available
| Dimensions | |
|---|---|
| External (L × W × H) | 40′0″ × 8′0″ × 9′6″ |
| Internal (L × W × H) | 38′0.2″ × 7′6.2″ × 8′4.3″ |
| Door opening (W × H) | 7′6.3″ × 8′5.1″ |
| Capacity & Weights | |
| Inside cubic capacity | 2,387 ft³ (67.6 m³) |
| Max gross | 77,160 lbs (35,000 kg) |
| Payload | 67,110 lbs (30,440 kg) |
| Tare | 10,050 lbs (4,560 kg) |
20′ Reefer
Used · Carrier brandedTwenty-foot refrigerated container with Carrier-branded machinery.
Features
- Three-phase power
- CFC-friendly refrigerant
- Stainless steel lined interior
- T-bar flooring
| Dimensions | |
|---|---|
| External (L × W × H) | 19′10.5″ × 8′0″ × 8′6″ |
| Internal (L × W × H) | 17′10.7″ × 7′6.2″ × 7′5.6″ |
| Door opening (W × H) | 7′6.3″ × 7′5.1″ |
| Capacity & Weights | |
| Inside cubic capacity | 1,003 ft³ (28.4 m³) |
| Max gross | 67,200 lbs (30,480 kg) |
| Payload | 60,960 lbs (27,650 kg) |
| Tare | 6,240 lbs (2,830 kg) Varies by machine type |
Gensets
Carrier, Thermo King and Taylor Equipment gensets available.
Carrier Transicold RG15
Clip-on
Clip-on genset that mounts to the front of the container to power a reefer in transit.
| Genset | |
|---|---|
| Type | Clip-on |
| Approx. weight | 1,675 lbs (760 kg) less fuel |
| Fuel tank | 130 gal (492 L) |
| Engine | CT4-134Di 4-cylinder water cooled, 2.2 L direct-injection diesel |
Carrier Transicold UG15
Undermount
Undermount genset that mounts beneath the chassis rail.
| Genset | |
|---|---|
| Type | Undermount |
| Approx. weight | 1,370 lbs (621 kg) less fuel |
| Fuel tank | 50 gal (189 L) |
| Engine | CT4-134Di 4-cylinder water cooled, 2.2 L direct-injection diesel |
Thermo King SG-5000
Clip-on or undermountFifteen-kilowatt genset available in both clip-on and undermount configurations.
Features
- EPA Tier 4 and CARB compliant
- SG+ microprocessor controller
- 12V battery, 925 CCA
- No. 2 diesel under normal conditions, No. 1 diesel in cold weather
- Multiple fuel tank sizes by configuration
| Genset | |
|---|---|
| Type | Clip-on or undermount |
| External (L × W × H) | 7′7.3″ × 2′6.0″ × 3′10.5″ (2,321 × 763 × 1,181 mm) |
| Weight less fuel | SGCO 1,920 lbs (871 kg) SGCM 50 gal 1,440 lbs (653 kg) SGCM 80 gal 1,500 lbs (680 kg) |
| Fuel tank | SGCO 125 gal (473 L) SGCM / SGSM 50 or 80 gal (198 or 302 L) |
| Power | |
| Output | 15 kW / 18.75 kVA |
| Generator | 460/230 Vac, 3 phase, 60 Hz at 1,800 rpm |
| Rotational speed | 1,500 ±25 rpm / 1,800 ±25 rpm |
| Engine | Thermo King diesel, EPA Tier 4 and CARB compliant |
Dry Containers
20′ Dry Container
NewStandard twenty-foot dry container, built from rust-resistant corten steel.
Features
- Corten steel construction
- 80-micron floor coating available
- Lock boxes available
- Waist-high door locking handles available
| Dimensions | |
|---|---|
| External (L × W × H) | 19′10.5″ × 8′0″ × 8′6″ |
| Internal (L × W × H) | 19′4.2″ × 7′8.6″ × 7′10.2″ |
| Door opening (W × H) | 7′8.2″ × 7′5.8″ |
| Capacity & Weights | |
| Cubic capacity | 1,165 ft³ (33.0 m³) |
| Max gross | 67,200 lbs (30,480 kg) |
| Payload | 62,720 lbs (28,450 kg) |
| Tare | 4,475 lbs (2,030 kg) |
40′ Dry Container
NewStandard forty-foot dry container, built from rust-resistant corten steel with vents for airflow.
Features
- Corten steel construction
- Ventilated for airflow
- 80-micron floor coating available
- Lock boxes and door locking handles available
| Dimensions | |
|---|---|
| External (L × W × H) | 40′0″ × 8′0″ × 8′6″ |
| Internal (L × W × H) | 39′5.7″ × 7′8.6″ × 7′10.2″ |
| Door opening (W × H) | 7′8.2″ × 7′5.8″ |
| Capacity & Weights | |
| Cubic capacity | 2,394 ft³ (67.8 m³) |
| Max gross | 67,200 lbs (30,480 kg) |
| Payload | 59,750 lbs (27,100 kg) |
| Tare | 7,450 lbs (3,380 kg) |
40′ High Cube Dry Container
UsedForty-foot high cube dry container, with one foot more interior height than a standard 40′.
Features
- Corten steel construction
- Ventilated for airflow
- Cargo-worthy and as-is grades available
- Typically released from marine service at 11–15 years
- Weights vary with build year and manufacturer
| Dimensions | |
|---|---|
| External (L × W × H) | 40′0″ × 8′0″ × 9′6″ |
| Internal (L × W × H) | 39′5.7″ × 7′8.6″ × 8′10.2″ |
| Door opening (W × H) | 7′8.1″ × 8′5.8″ |
| Capacity & Weights | |
| Cubic capacity | 2,700 ft³ (76.4 m³) |
| Max gross | 67,200–71,650 lbs (30,480–32,500 kg) |
| Payload | 57,870–63,710 lbs (26,250–28,900 kg) |
| Tare | 7,940–9,330 lbs (3,600–4,230 kg) |
Chassis & Terminal Equipment
40′ Gooseneck Chassis
Used · road-worthy or as-isForty-foot gooseneck chassis for over-the-road moves of 40′ ISO containers.
Features
- Built for 40′ ISO containers
- Radial tires
- LED lights
- Road-worthy with current FHWA inspection, or as-is
- Survey and photos available on request
| Dimensions | |
|---|---|
| Overall length | 40′8.5″ (12,408 mm) |
| Overall width | 96″ (2,438 mm) |
| Fifth wheel height | 48″ (1,219 mm) |
| Rear deck height | 48″ (1,219 mm) |
| Weights | |
| Tare | 6,800 lbs (3,084 kg) |
| GVWR | 67,200 lbs (30,481 kg) |
20′ Slider Chassis (23′6″)
Used · road-worthy or as-isTwenty-foot slider chassis, extending from 23′6″ to 27′6″.
Features
- Built for 20′ ISO containers
- Sliding frame, 23′6″ retracted to 27′6″ extended
- Radial tires
- LED lights
- Road-worthy with current FHWA inspection, or as-is
| Dimensions | |
|---|---|
| Overall length, retracted | 23′6″ (7,163 mm) |
| Overall length, extended | 27′6″ (8,382 mm) |
| Overall width | 96″ (2,438 mm) |
| Fifth wheel height | 48″ (1,219 mm) |
| Rear deck height | 52.75″ (1,340 mm) |
| Weights | |
| Tare | 6,900 lbs (3,130 kg) |
| GVWR | 67,200 lbs (30,481 kg) |
45′ Terminal Chassis (Bomb Cart)
New · 2 axleTwo-axle terminal chassis for moving containers inside ports, terminals and yards. Carries one or two 20′ boxes, or a single 40′ or 45′ box, on solid tires with a heavy steel frame.
Features
- Carries 1 × 20′, 2 × 20′, 1 × 40′ or 1 × 45′ ISO containers
- Q345B steel I-beam frame (H/520 mm)
- 2″ king pin, pin-type landing gear (24,000 kg capacity)
- FUWA 20-ton axles (× 2), mechanical suspension with 10-leaf spring
- Solid tires, 11.00-20 (8 pcs), 8.00-20 rims
- Dual air brake system with WABCO relay, 30/30T chambers
- 24V / 12V electrical, LED rear lighting
| Dimensions | |
|---|---|
| Overall length | 46′3″ (14,106 mm) |
| Overall width | 108.3″ (2,750 mm) |
| Overall height | 69.3″ (1,760 mm) |
| Axle spacing | 51.6″ (1,310 mm) |
| Weights | |
| Tare | 17,640 lbs (8,000 kg) |
| Max payload | 92,590 lbs (42,000 kg) |
| GVWR | 110,230 lbs (50,000 kg) |
| Axle rating, each | 28,660 lbs (13,000 kg) |
Special Containers
Fixed post flat racks are also available in addition to the flush folding units shown.
20′ Flat Rack
Used · flush foldingTwenty-foot flush folding flat rack for heavy and out-of-gauge cargo.
Features
- Heavy duty steel frame
- Thick plank floor
- Flush folding end frames for efficient stacking
- Folded height 1′2.6″ with end frames down
| Dimensions | |
|---|---|
| External length × width | 19′10.5″ × 8′0″ |
| External height, frames up | 8′6″ |
| External height, frames down | 1′2.6″ |
| Internal (L × W × H) | 19′9.7″ × 7′2.4″ × 7′3.9″ |
| Weights | |
| Max gross | 74,960 lbs (34,000 kg) |
| Payload | 68,590–69,120 lbs (31,110–31,350 kg) |
| Tare | 5,840–6,370 lbs (2,650–2,890 kg) |
40′ Flat Rack
Used · flush foldingForty-foot flush folding flat rack for heavy and out-of-gauge cargo.
Features
- Heavy duty steel frame
- Thick plank floor
- Many units with flush folding end frames for stacking
- Folded height 2′1.5″ with end frames down
- Confirm gross weight rating per unit
| Dimensions | |
|---|---|
| External length × width | 40′0″ × 8′0″ |
| External height, frames up | 8′6″ |
| External height, frames down | 2′1.5″ |
| Internal (L × W × H) | 39′11.6″ × 7′9.5″ × 6′5.1″ |
| Weights | |
| Max gross | 99,210 / 110,230 / 115,740 lbs (45,000 / 50,000 / 52,500 kg) |
| Payload | 86,420–104,760 lbs (39,200–47,520 kg) |
| Tare | 10,540–12,790 lbs (4,780–5,800 kg) |
Need a quote or a survey?
Send the equipment type, quantity, condition grade and delivery location.
Specifications shown are nominal figures for each equipment type and vary by manufacturer, build year, machinery type and unit condition. Weights, dimensions and inspection status should be confirmed against the documentation for the specific unit before booking, permitting or loading. Availability is subject to prior sale.
Sales
Containers, gensets, chassis, terminal equipment and special containers sold new, used and as-is.
Buying From Us
Units are sourced against your requirement rather than sold off a fixed list.
Tell us the equipment type, the quantity and where it needs to go. We come back with what is available in that condition grade at that location, with photos and a unit survey where you need them.
Include with a purchase inquiry
- Equipment type and quantity
- Condition grade required, for example cargo worthy, road worthy or as-is
- Delivery location or pickup depot
- Machinery brand preference for gensets and reefers
- Target date
- New
Factory units, one trip or unused - Cargo worthy
Certified fit for international shipment - Road worthy
Chassis with current FHWA inspection - As-is
Sold in current condition for buyer repair
Ready to buy
Send the equipment type, quantity, condition grade and delivery location.
Leasing
Short term and long term leasing on gensets, refrigerated and dry containers, chassis and special containers.
Available for Lease
Gensets
Clip-on and undermount units. Carrier, Thermo King and Taylor Equipment.
Refrigerated Containers
20 foot and 40 foot high cube reefers.
Dry Containers
20 foot, 40 foot and 40 foot high cube dry boxes.
Chassis
40 foot gooseneck, 20 foot slider and terminal chassis.
Special Containers
20 foot and 40 foot flat racks, fixed post and flush folding.
Lease Inquiries
Include the following and we will come back with availability and a rate.
- Equipment type and quantity
- Lease period
- Pickup or delivery location
- Power requirements for gensets and reefer units
- Whether the unit needs to be road worthy with a current FHWA inspection
Rates and minimum lease periods are quoted per requirement and location. Full specifications for every unit type are on the equipment page.
- Short term and long term available
- Rates quoted per requirement
- Delivery and pickup arranged on request
- Unit surveys and photos available before dispatch
Lease inquiry
Send the equipment type, quantity, lease period and location.
Cold Storage
On-site and transportable cold storage solutions. Refrigerated container rentals and temporary cold storage placed where you need the space.
Cold Storage Solutions
On-Site Cold Storage
Refrigerated containers placed at your facility as additional temperature controlled space.
Transportable Cold Storage
Units that move with the load. Reefer containers on chassis with genset power for cold chain in transit.
Temporary Cold Storage
Short term capacity for seasonal peaks, facility downtime, equipment failure and overflow.
Refrigerated Container Rentals
20 foot and 40 foot high cube reefers rented by the week, month or season.
Setting Up Cold Storage
A reefer container on site gives you temperature controlled space without building it.
Units run on three phase power or on a genset where site power is not available. We handle delivery, placement and pickup, and the unit can stay for a week or a season.
Include with a cold storage inquiry
- Temperature range required
- How much space you need, in container size or pallet count
- Site location and access for delivery
- Whether site power is available, or whether you need a genset
- How long you need it
- Seasonal overflow capacity
- Cover during facility downtime or a freezer failure
- Construction and site work
- Events and temporary operations
- Food, beverage and pharmaceutical cold chain
Need cold space
Send the temperature range, the volume, the site location and how long you need it.
Parts and Service
Parts supply and mobile service for gensets and refrigerated container units.
Parts
IEG Intermodal is an authorized Carrier parts dealer.
Parts supplied for gensets and refrigerated container machinery. Send the unit details and we will confirm the part, price and lead time.
Include with a parts inquiry
- Unit make and model
- Serial number
- Part number if you have it
- Quantity
- Delivery location
- Authorized Carrier parts dealer
- Genset parts
- Reefer machinery parts
- Chassis and container hardware
Service
Mobile service for gensets and refrigerated container units.
Service is carried out on site with a fully equipped service truck. Send the unit make, model and location along with the fault and we will come back on scheduling.
Include with a service request
- Unit make, model and serial number
- Fault or alarm code
- Unit location and site access details
- Whether the unit is loaded
- Mobile service for gensets
- Mobile service for reefer machinery
- Pre-trip inspections
- Diagnostics and repair on site
Parts or service request
Send the unit make, model and serial number with the part number or fault.
Contact
Send your requirement and we will come back with availability and pricing.
Contact IEG Intermodal
Email is the fastest way to reach us. Use the form or write in directly.
jeff@iegintermodal.com